Видео

yup! www.wsupercars.com/

Here you go - its only active 7 days from now. IMPORTANT my Trackir trackclip settings are : (Speed 0.6 and Smooth 19) combined with this profile we.tl/t-o1Tfgndvkm

@@NesterowiczRacing you rock :) many many thanks

here + they are in scale to one another :) instagram.com/world_race_circuits/

@@NesterowiczRacing thank you so much!

By now top reviewers and drivers all know that the quality of high end DD engines is very good and close in comparison to each other. I know some people think slew rate is everything. But IRL it's also a marketing (number ) as a human Body can not react below 20ms. So feeling difference between 3and9 ms is hard. I tried the asetek and simucube many many many... times. They are good for sure. But not better imho. if anything maybe 5% "better" max :) And as the DD2 has been out for 5 years the firmware and software is very refined. Which is essential.

Thats not true, i tried fanatec dd1 and as i has simucube 2pro i immediatle felt some artificial feeling in the base when turning the wheel. So it is not 5 % difference it is for me almost completely different feeling. So simucube 2pro all the way!

@@amigoz3201 its true the nature of the rotation of the outrunner vs inside electric engine is different and both DD1 and DD2 has a texture on no power rotation compared to Simucube, but that has nothing to do with the ffb ;) so one can say simucube feels smoother, but it does not relate to effect. but im happy you are happy for simucube, its good, but i tried it so many times and to me it is not better at all, sometimes (with bad settings its even worse) for me :)

I run native resolution as it will be a lot sharper compared if you run off set. I run 1440*2560 *3. But different sims have different options

@@NesterowiczRacing I see what you mean, but I noticed that the degradation of the image will come especially with the use of a screen that is too large, for the given resolution... the larger it is, the more the pixels become. visible Thank you for your quick response, it allowed me to question my ideas (the difference in terms of fps between your configuration and the one I thought I would do is too ridiculous)

So it is the same design as the ergtron hx - but cheaper. And i drilled a hole in the solid table for more centered mounting. And there are no issues, of course i do not extend the screens super far over towards my simracing position. but i have it placed close as i want. closer than my previous triples!

yup. but i did another setup when i had triples. i could rotate all of them in 1 pivot :)

thats what i thought too :) almost 7 years with triples - but using headtracking helps + the frametime is much lower making things fluid.

@@NesterowiczRacing I never have any issues with fps, but that being said even at some race starts with full grids if the fps drops to below 90 I don’t even notice it, I would have to look at the fps display to know it’s lower than usual. Perfectly smooth. I just did an hour league race at Fuji in the wet and all setting are at max and I was streaming and still perfectly smooth with average fps around 100

We used to race in pc2 together, not sure if you remember

Wow really! Good times in PC2! :) and he's triples still give that more "edge" but I tested and end up with this small Ultra wide :). Hope you are good mate

I went from triples to a 49” ultrawide and I find it much more immersive as their isn’t any line in between the screens

thx

I use shifters and everything but I intentionally went with fanatec podium hub. i like the look and the wheels is closer to me so it's all fits my needs. But yea the adaptors are a possibility

By the Way...nice Setup you have.

YES! The transducer setup is a DIY project that cost me 200€ total. And honestly it gives any wheelbase a compliment as it is a separate system and the input is your bottom and back hehe. I would never build a setup without it . Never

thx

So I went to a "blacksmith " asked if he had any flat iron bar. And he did. Asked him to cut it and drill 2 holes in it .I took it home cleaned it also with s bit of oil. Then mounted. And bought rolls of magnetic tape that can be written on. And I use a Dymo label writer and put the times on the magnetic strips

I have 2 transducers that are bigger than simagic. Under the tray where my heels are. That gives small vibrations when abs or curbs are hit. But also engine rev

I made a link in the video. To my video about the transducer setup. I mention it there. But it's a noname brand amp and USB soundcard

Need to review my cable management hehe. As I've upgraded lots over time. So a fresh rewire is due

Sure - take note i use NVCP (nvidia) to cap frames at 240 - not in iRacing. as there is no reason to heat up the GPU I marked the items that are heavy on GPU and that i find valuable to adjust as shown. Of course AA is also heavy . click to see screenshot > imgur.com/a/GFqYtTn

Not sure if you are referring to using headtracking? because i think using trackir5 with a ultrawide is the perfect mix between VR & HighFPS +IRL look = Hybrid VR :) VR is fun for a little while. in my experience :)

@@NesterowiczRacing Track IR cant compare to VR bcs dont have this senesce of depth that VR gives you. It really feels like you are in the car much more natural than the monitor. I have RTX 4090 like you and all is running very smooth , even ACC :)

@@martintop2605 yea i have had VR myself i prefer triples or ultrawide. VR is ok for a little time 1 or 2 hours. i do big races too, i.e i did 6 stintes in 7 hours in the night on 24H Nordschleife - i could not do that with VR :)

Very good setup and video :) I too use Trackir, can I ask you to share the profile you use? Thank you very much 😊

Thx man - result of 7 years of commitment and trial and error. :)

Thx man - result of 7 years of commitment and trial and error. :)

maybe just take 4 xof the same size shakers

@@NesterowiczRacing thanks…the big ones or the smaller ones?

100% more happy!

Thx

I know what you mean. It is slightly thicker than fanatec but not as thick as GSI. In between . I have already done quite some hours with it and to me this is the perfect size. Ofc that's subjective

@@NesterowiczRacing 👍Thanks for the reply.

Thx

Yea I considered that (and other emulators) but didn't want to mix more brands. Also what looks better is subjective tbh ;) I like the podium hub design and color.

The Leoxz is 1:1 QR2 Pro with inside Emulator .It emulates Formula Carbon like SRM

Nope. As Fanatec is proprietary (still) you connect the coiled USB cable directly to your PC. And use Simhub. I've been running wirelessly for years. And my conclusion after the first week with cable is that I don't even notice it.

its awesome :) have fun

I think you can mount 6 without it becoming complicated. Just remember vibration spread :). Again I love my setup. Curbs feel so good

if you look. i use cables. thats 4x rca/phono > 2x minijacks. no splitters :) as its 4 channel

hey, i do not combine the sound and the haptic feedback. i disabled the LFE in iracing. and just use simhub. dont know if that helps.. but youi shoudl not be dependant on one another